Polyethylene Tee 16 mm

Description

Polyethylene Tee 16 mm

Polyethylene Tee 16 mm which is the smallest tee size. 16 mm tee is one of the types of connections used in drip irrigation and this product is designed and manufactured as a toothed pressure.

This product is used to connect lateral tubes in triplets and also for splitting from the main lateral tube. With the help of this tee, you can split and exit from the side pipes or sixteen millimeters.

Application of 16mm tee features

This product has high resistance to harness and cooling.
In contrast to the rays of sunlight and sunshine, it has the characteristic that its color remains constant.
1- This tee is easy to install on the drapers.
2- It costs a lot of money and is affordable.
3- This tee can also be connected and installed to other fittings and pipes.
4- These connections make water transfer easy.
5- It has high resistance to corrosion, decay and clogging.

6- This product can be installed without the need for tools by hand and with very low pressure.
And even someone who doesn’t have enough knowledge about this product can use it easily.

These three ways can be used in the following ways:

1_In drip irrigation of tape strips, from this product from manifold pipe (sub) to the sides of the branch.  Usually on the side tube after installing the gasket, the three-way 16 mm is installed on it. On both sides, the valve is attached to 16 and the two sides irrigate the manifold tube.

2_In the garden of the villas when a 16 mm pipe is taken several branches to the sides.

3_In watering the garden of villas where swine tail method or loop around trees is implemented, three ways 16*16*16 is used.

4_In cases where lateral pipes connect the garden from the end.j