Polyethylene bend 16 mm

Description

Polyethylene bend 16 mm

Polyethylene bend 16 mm  is a piece that is embedded to split and change the angle of water path.And in the category of drip connections.The use of this product is also very common in agriculture.In some cases that the water pressure is high, clips on each side of the interface should be used to not separate the water pressure of the interface from the pipe. These connections are produced and supplied from the working pressure of 4 atmospheres. this product is one of the components of polyethylene fittings. That have a lot of application in greenhouse systems, irrigation systems and agriculture.

this product  has high mechanical and chemical resistance. And it is designed in different sizes to connect to a variety of fittings.

this product  has color fastness and high sun resistance.

equpment is not decayed in the face of environmental stresses and in the face of chemicals and is resistant to corrosion and clogging. This bend is available in 45 and 90 degrees and is tolerant of various pressure ranges.

One of the important advantages of polyethylene bend is that the pipes are not folded during irrigation and irrigation is easily done.

Drip Irrigation Fittings

Polyethylene drip irrigation fittings are a variety of highly used fittings in pressurized irrigation in agricultural industry. And for sealing and safety of pipes, adjusting the water flow, resizing the pipe and changing the flow path is used.

Drip irrigation fittings include a variety of clamps, bend , turns, tee and hose heads. And it is produced and used in a variety of different sizes and with different thicknesses for different types of pipe sizes.

Drip irrigation refers to all methods in which water is drained in small amounts, about 1 to 10 liters per hour, and slowly near the plant. For this reason, this irrigation method is known as low volume irrigation method.  Drip irrigation has several methods and concepts such as drip irrigation, sub-inpatient irrigation, fountain irrigation and spray irrigation.

In drip irrigation, water is distributed in a tubular system on the farm, and the device or mechanical device from which water is emitted out and provided to the plant is called an outlet or emitter.