Polymer butterfly valve with metal handle

Description

Polymer Butterfly Valve

Polymer Butterfly Valve is  placed in an irrigation system or transmission line to control the flow, as the name suggests is made of hard polymer and its handle is made of metal, one of the reasons why these valves are made is the high cost of cast iron valves.

Therefore, it can be concluded that the use of these valves in projects is more cost-effective than cast iron machinery. To install this valve in the middle of polyethylene pipes, first cut the pipe and weld the two edges of the pipe flange ring, then tighten it with bolts.

. Therefore, it can be concluded that the use of these valves in projects is more cost-effective than cast iron machinery. To install this valve in the middle of polyethylene pipes, first cut the pipe and weld the two edges of the pipe flange ring, then tighten it with bolts.

to the two edges of the pipe and installed. by bolts of the valve, these valves are light

compared to cast iron valves and its transportation by the worker is simply done and therefore it is easier to install than cast iron valves.

Because of the type of valve that is made of dry polymer. During installation, it should be noted that there is not much pressure on the valve.  Because then the valve breaks.

Of course, the category of this valve is made of metal.  Like other fittings, this valve is produced in different sizes of 2 inches, 3 inches and four inches. And

In general, this valve is recommended for cheap and light price